MeridianLink Check Printing – OSI Workstation Print Override to Tray 3

MeridianLink Check Printing – OSI Workstation Print Override to Tray 3

(see attached for detailed instructions)

Services Tab\ System\ Printing Operations\ Print Specifications\ Print Specifications \ Workstation Overrides

click Create

Hit the T on the keyboard, this will put TELL MCR TRAY 3 in the Printer Specification box

 Only create for TELL MCR TRAY 3 (we do not use Check Printing or CSR MCR TRAY 3 ever)

Click the drop-down arrow on the Printer Location ID box and select

Teller Side: TCK3 Printer TRAY 3

 - the Laser Printer path box should be HP-CHK1

FSR Side, hit the C on the keyboard and select  - CCK3 Printer TRAY 3

 - the Laser Printer path box should be HP-CHK2

I would like to go ahead and create the override on all workstations like we used to so we do not have figure out which ones need it and which ones don’t. It will not make a difference if they don’t use it.