Cash Advance Machine IP Setup Procedures

Outline for Cash Advance Machines

TSYS Tech Support: 800-228-2443

 

CURRENT IP INFO FOR TSYS CASH ADVANCE TERMINALS AT THE BRANCH LOCATIONS

10/1/2015

 

CC: IP - 172.16.31.120   SN – 255.255.252.0   GW – 172.16.31.254   DNS – 10.20.0.120

CVE: IP – 172.16.99.121   SN – 255.255.255.0   GW – 172.16.96.254   DNS – 10.20.0.120

EC: IP – 172.16.12.120 SN – 255.255.252.0 GW – 172.16.15.254 DNS – 10.20.0.120

IB: IP – 172.16.9.8 SN – 255.255.252.0 GW – 172.16.8.254 DNS – 10.20.0.120

KM: IP – 172.16.78.120 SN – 255.255.255.0 GW – 172.16.78.254 DNS – 10.20.0.120

LM: IP – 172.16.59.120 SN – 255.255.255.0 GW – 172.16.59.254 DNS – 10.20.0.120

MM: IP – 172.16.60.120 SN – 255.255.255.0 GW – 172.16.60.254 DNS – 10.20.0.120

NI: IP – 172.16.32.120 SN – 255.255.252.0 GW – 172.16.35.254 DNS – 10.20.0.120

SB: IP – 172.16.52.120 SN – 255.255.252.0 GW – 172.16.52.254 DNS 10.20.0.120

SP: IP – 172.16.5.5 SN – 255.255.252.0 GW – 172.16.7.254 DNS – 10.20.0.120

  

THIS IS INFO FOR THE OLD CASH MACHINES ORGINALLY SETUP IN THE BRANCHES

  

1. Get terminals connected to the network and setup with static IPs
   1. Do a site survey at each branch,(make sure there is a network drop to use)
   2. Set the Terminals up with static IPs(Procedure is below
   3. Plug into the network
   4. Test
2. Configure Firewall
   1. Setup Security policy

                    i.      Allow terminals access to destination IPs over 443, 550, and 5003

                    ii.      Monitor Traffic

1. Configure NAC Policy
   1. Create Policy in Policy manager(Give Terminals only Inet access)
   2. Assign to ports
   3. Test

 

You will need this information. Get the IP addresses from your system administrator before you begin.

Information Required	Description
Terminal IP Address	The terminal's internet   protocol address (example  10. 50.  3. 57)
Terminal Subnet Mask	The address identifying the   subnet to which the terminal IP address belongs (example 255.255.255.    0).
Gateway IP Address	The address identifying the node on a network that serves as an entrance to another network (example  10.   50.  3.  1)
Terminal DNS IP Address	The address of the domain   name system that translates domain names into IP addresses (example  10.   50.  4.  1).
Daylight Savings	Indicates whether the   terminal will automatically adjust the time to meet the requirements for   Daylight Savings time.
Terminal Time	The internal time the   terminal uses for the clock display and timestamping functions.

From the home screen (the screen that says financial and IP diagnostics), press the blue Function key to access the Maintenance screen.

Select Deployment Config, then press Enter.

Select Terminal Config, then press Enter.

When prompted to allow the DHCP server to set the IP, select No, then press Enter.

Type the terminal IP address , then press Enter. Type the terminal subnet mask, then press Enter. Type the terminal gateway IP address, then press Enter. Type the terminal DNS IP address, then press Enter. When prompted for a daylight savings preference, select Enable, then press Enter. Type the current time in the format shown on the screen and select AM or PM, then press Enter. When prompted to configure a download host, select No, then press Enter.   When prompted to save the changes, select Yes, then press Enter. The screen indicates that saving is in progress. The terminal desktop appears.