Catalyst Branch Capture Install Procedure

Catalyst Branch Capture IP Capture Installation Procedure (instructions attached)

Request Security adjust Bit 9 to Medium

Pre-requisites:

1. Copy \\islandstor\files\CatalystBranchCaptureFiles\ *.* to C:\Source
2. Test connection to BCTEST.SWCORP.org for Test (telnet bctest.swcorp.org 50669)
3. Test connection to BCPRI1.SWCORP.org for Primary Prod (telnet bcpri1.swcorp.org 50669)
4. Test connection to BCSEC2.SWCORP.org for Secondary Prod (telnet bcsec2.swcorp.org 50669)
5. IP Capture Login ID for test = 4357
6. IP Capture ID 4357 Password: Admin#22
7. IP address of branch capture should be static
8. UIN and IP address info:

Location	UIN	IP address	Subnet Mask	GW	DNS1	DNS2
Production Services	5605
NI	5606	172.16.35.222	255.255.252.0	172.16.35.254	172.16.35.100	10.20.0.120
MM	5607	172.16.60.222	255.255.255.0	172.16.60.254	172.16.60.100	10.20.0.120
IB	5608	172.16.11.222	255.255.252.0	172.16.11.254	172.16.11.100	10.20.0.120
LM	5609	172.16.59.222	255.255.255.0	172.16.59.254	172.16.59.100	10.20.0.120
EC	5610	172.16.15.222	255.255.255.0	172.16.15.254	172.16.15.100	10.20.0.120
CV	5611	172.16.99.222	255.255.255.0	172.16.99.254	172.16.99.100	10.20.0.120
CC	5612	172.16.31.222	255.255.252.0	172.16.31.254	172.16.31.100	10.20.0.120
SP	5613	172.16.7.222	255.255.252.0	172.16.7.254	172.16.7.100	10.20.0.120
KM	5614	172.16.78.222	255.255.255.0	172.16.78.254	172.16.78.100	10.20.0.120
SB	5615	172.16.55.222	255.255.255.0	172.16.55.254	172.16.55.100	10.20.0.120

 

Procedure:

1. Install the Canon Scanner Driver

-Go to c:\source\1_CanonScannerDriver\135_190DRR_V42110-1701 and right click and Run as Administrator

 

1. Install the Bluepoint – IP Capture application

-Go to c:\source\2_BluePointIPCapture\Bluepoint – IP Capture and right click and Run as Administrator

 

1. Run the Parascript RIRegAccessDest

-Go to c:\source\3_Parascript RIRegAccessDest\RIRegAccessDest and right click and Run as Administrator

 

1. On the desktop, right click the “IP Capture” shortcut and Run as Administrator

Enter the following: Below is for Southbay Branch and connecting to the Catalyst Test System

Server: bctest.swcorp.org

UIN = branch number per table on h: (or see below)

 

1. Click OK - Navigate to C:\Program Files (x86)\Blue Point Solutions and give Full control permission to the ‘BranchCaptureWausauUsers” AD security group
2. After hooking up the Canon Driver, update the firmware of the scanner
   a. Click Start ->All Programs->Silver Bullet Technology->Ranger for Canon-CR135iCR190i
   b. Right click “RangerFlex for CR-135i_CR-190i” and Run as Administrator 

 

 

When switching to Production:

 Copy “IPCapture.exe.config” file (this config file will come from Catalyst - and can be found in \\helpdeskstor\General\Catalyst) to C:\Program Files (x86)\Bluepoint Solutions\RDC\IP Capture (select “Copy and Replace”)

 

Locate the IP Capture icon on the desktop and launch the application.

 

Once the application is launched, you will be prompted to enter the UIN. The UIN(s) for your branch(es) are as follows:

Organization		UIN
0001 Production Services [0001]	224667
0003 North Island [0003]	224669
0004 Mira Mesa [0004]	224670
0005 Imperial Beach [0005]	224671
0006 La Mesa [0006]	224673
0007 El Cajon [0007]	224675
0008 Chula Vista East [0008]	224676
0009 Centre City [0009]	224677
0011 Scripps/Poway [0011]	224678
0012 Kearny Mesa [0012]	224680
0065 South Bay [0065]	224681

 

 

Please enter the UIN(s) above and click OK, then the program will launch.

Proceed to log in with the password obtained from your RDS Analyst.

If you have not already obtained your new production password please contact the RDS team at 1-800-442-5673 ext. 7515 option 1.